C75 stud and track roll forming machine for roofing buildings, GI sheets
Quick Detail:
- Thickness : 0.8-1.2mm
- Material : Galvanized steel
- Material weight: 1.5MT cap.
- Driven way: by 5.5Kw driven motor
- Cutting way: by hydraulic power pack, there is waste after cut-off
- Cutting tolerance : ±1mm
Application:
On a heavy gauge metal or steel structural building, people always use C steel purlins or Z steel purlins to build the steel frames and roof trusses, while Metal furring channels or roof channels climb to the top of components lists for roof trusses of lightweight or light gauge steel frames.
The metal furring channels or hat channels are produced from thin galvanized steel (0.6-1.2mm thickness) by roll forming machines and a metal furring channel or hat channel roll forming machine, like other lightweight or light gauge steel frame roll forming machines, generally consists of a manual de-coiler, a feeding unit, an embossing rolling tool, a roll forming unit, a cutting unit, a transmission system, a cutting unit, a hydraulic oil pump, a PLC control system and runout tables.
Machine list:
- 1.5MT*300mm manual un-coiler
- Roll forming machine
- Hydraulic cutting device
- Run out table
- PLC control system
Description/Technical Parameter details of complete line:
- 1.5TX300mm Manual Un-Coiler
Un-powered; Load capacity= MAX.1.5Ton
Coil inner–diameter=410-570mm
Coil Width= MAX.300mm
- Roll forming machine with cutting details as below table :
| Suitable roll forming material | galvanized steel sheet |
| Thickness | 0.8mm-1.2mm |
| Carriage Frame design | Wall-plate-frame-design |
| Rolling mills forming stages | 14 stages |
| Material of forming roller | 45# steel, heat treatment Hard Chrome Coated |
| Shafts Diameter | Φ65mm |
| Main motor power | 7.5Kw with reducer |
| Line speed of roll former | 15mtr per min |
| Hydraulic group power | 3.0 Kw |
| Material of cutting blade | Cr12, hear treatment |
| Electric Voltage Standard | 380V/50Hz/3PH or requirements |
| Major Color of Machine Painted | RAL 5015(Blue) or customized |
Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder
Cut-to-length tolerance≤±1mm
Control Voltage 24V
- Product Rack 4 meter length rolled type
Profile Drawing/Layout/Equipment reference pictures:
Product Tags:
|
|
C75 Stud And Track Roll Forming Machine For Roofing Buildings / GI Sheets Images
|
